Kalde rom og telt varmes opp effekt

Kalde rom og telt varmes opp effektivt med denne byggvarmeren av høy kvalitet.

Type: Master B35CED, 230V, 1-fas parafin varmluftaggregat på 10 kW.
Istedenfor tradisjonell brennstoffpumpe benyttes rotor-/ejektorsystem slik at
brennstoffet ikke passerer noen bevegelige deler. Luft med lavt trykk ledes
fram til dyseområdet hvor den trekker med seg brennstoff som forstøves gjennom
dysen og antennes av elektrodesett med kontinuerlig gnist.
Takket være forbrenningssystem med effektiv etterbrenner i fronten av brennkammeret elimineres
sot, kullos (co) og gnister. Kullosutslippet er lavere enn 0,001%.
Produktnavn MASTER B35CED, 10KW
Brennstoff Parafin
Brensel- forbruk 0,8kg/time
Tank-innhold 15 liter
Effekt 10kW
Vekt 17 kg
LxBxH 810 x 350 x 450 mm
Luft-mengde 280m³/time

Results (English) 1:

Cold rooms and tent warms up efficiently with this construction heater of high quality.Type: Master B35CED, 230V, 1-fas paraffin hot air heat recovery unit at 10 kW.Instead of traditional brennstoffpumpe is used-so that the rotor/ejektorsystemfuel do not pass any moving parts. Air with low pressure is headedforward to dyseområdet where it pulls with it the fuel that forstøves through thethe nozzle and ignited by the electrode set of continuous spark.Thanks to the internal combustion system with effective Afterburner in the front of the Firebox are eliminatedsoot, carbon monoxide (co) and sparks. Cool los discharge is lower than 0.001%.Product name MASTER B35CED, 10KWFuel KeroseneFuel-consumption 0, 8 kg/hourTank content 15 litersEffect 10kWWeight 17 kgLxwxh 810 x 350 x 450 mmAir-quantity of 280m ³/hour

Results (English) 2:

Cold rooms and tents heated effectively with the heater of high quality. Type: Master B35CED, 230V, 1-phase paraffin hot air units at 10 kW. Instead traditional fuel pump used rotor / ejector system so that the fuel does not pass any moving parts. Air at low pressure is fed until the nozzle area where it draws with the fuel sprayed through the nozzle and ignited by electrode set with continuous spark. Thanks to the combustion system with efficient afterburner in front of the combustion chamber is eliminated soot, carbon monoxide (co) and sparks. Kullosutslippet is lower than 0.001%. Product name MASTER B35CED, 10KW Fuel Kerosene Fuels consumption 0.8kg / hour Tank content 15 liter Power 10kW Weight 17 kg LxWxH 810 x 350 x 450 mm Air-quantity 280m³ / h

Results (English) 3:

Cold rooms and tent heats up effectively with this build heater of high quality.

Type: Master B3 5CED, 230V, 1-phase paraffin hot air unit on 10 kW.
instead of traditional fuel pump used rotor/ejector system so that
burn the fabric does not pass no moving parts. Low pressure air is directed
forward to the nozzle area where the screwdriver with the fuel that forst exerted through
Nozzle and ignite the Electrode kit with continuous spark.
thanks to the combustion system with efficient after burner in front of the burn chamber is eliminated
soot, kullos (Co) and sparks. Kullosutslippet is lower than 0,001%.
Product Name MASTER B3 5CED, 10KW
Fuel Paraffin
fuel consumption 0,8kg/hour
Tank content 15 liter
Power 10kW
Weight 17 kg
LxBxH 810 x 350 x 450 mm
Air-flow 280m³/Hour